Overview of our Range of Access Covers

Why choose the a McBerns Access Cover?

Z

Exclusive McBerns frame extrusion

Z

Custom made to suit site requirements

Z

4 side void protection safety grate system with removable front grate and also swing gate

Z

Design, fabrication and installation service

Z

A, B, C & D load rate tested

Z

Lightweight lift

Z

Flush mounted or mounted on hob

Z

Hinged safety grates (removable)

Z

Safety Rail System

Z

Australian Made and Owned

Access Cover Designs

LFPM Design (Lid Flush Premium Mount)

The LFPM lid combats gases escaping and water entering the void. The lid has a water & gas tight requirement built in and still has hinged capabilities for easier lifting and lowering.

LFVP (Lid Flush Void Protection)

The LFVP design provides a 4-side barrier system which eliminates the risk of falling into an open void. Designs range from a single lid application (1050 x 1050mm Clear Opening) up to 3 lid application.

LFM Design (lid Flush Mount)

The LFM is an entry level cost-effective void protection lid. It allows personnel to lift the lid while still been protected by the safety grate underneath.

LPL Design (Low Profile Lid)

Light weight lid design option to replace gatic lid with a frame depth of 72mm.

Reservoir Access Covers

Retro Fitting, Water, Manholes, Air Valves

LFPR Design (Lid Flush Post & Rail)

The LFPR provides a 4-side barrier system while still conforming to the AS1657 barrier height standard. Available as a single lid application up to either 3 or 4 lid depending on the chamber size.

Bolt Down Access Covers

Designed to Bolt Down to ensure Water and Gas tight.

Grated Lid Access Covers

Where access safety is required.

Telescopic Access Covers

Ideally used with smaller opening LFVP to achieve required height.

Custom Designs

Designs include round, octagonal, lids in a checker plate frame and large multi lid arrangements. With large multi lid designs lid placement can be designed to client’s specific requests for access points.